Touch Inspection Of Stamping Press Parts

Wipe the surface of the stamping press parts with clean gauze. The inspector needs to wear touch gloves to touch the surface of the pressed part along the longitudinal direction of the pressed part, and this inspection method depends on the experience of the inspector. If necessary, the suspected area can be polished with an oil stone and verified, but this touch inspection method of stamping press parts is an effective and quick inspection method.

Oiling Inspection Of Stamping Press Parts

Wipe the surface of the stamping press parts with a clean gauze cloth. Then use a clean brush to apply oil evenly in the same direction to the whole outer surface of the stamping press parts. Put the oiled stamping press parts under a strong light to inspect, and it is recommended to put the stamping press parts vertically on the body position. With this oiling inspection method for stamping press parts, tiny pockmarks, deflated ponds, and corrugations on the stamped parts can be easily detected.

Visual Inspection Of Stamping Press Parts

Visual inspection is mainly used to find the appearance abnormalities and macroscopic defects of stamping press parts.

Inspection Tools Of Stamping Press Parts

Put the stamping press parts into the inspection tool and test the stamping parts according to the operational requirements of the inspection tool manual.