1. OEM Metal Stamping Part High Dimensional Accuracy

OEM metal stamping parts have high dimensional accuracy, uniform size of the same molded parts, and good interchangeability. It can meet the general assembly and use requirements without further mechanical processing.

2. OEM Metal Stamping Part Low Work Volume

Cold OEM metal stamping parts are generally no longer machined by cutting, or only need a small amount of cutting. The precision and surface condition of hot OEM metal stamping parts is lower than that of cold stamped parts, but still better than castings and forgings, with less cutting.　　

3. OEM Metal Stamping Part High Surface Quality

OEM metal stamping parts in the stamping process because the surface of the material is not damaged, so there is a high surface quality, smooth and beautiful appearance, which provides convenient conditions for surface painting, electroplating, phosphating, and other surface treatment.

4. OEM Metal Stamping Part High Strength

OEM metal stamping parts are manufactured by stamping with little material consumption. The parts are light in weight and rigid, and the internal organization of the metal is improved after the plastic deformation of the sheet, which makes the strength of the stamped parts increase.

5. OEM Metal Stamping Part Rigidity

Compared with castings and forgings, OEM metal stamping parts are thin, uniform, light, and strong. Stamping can produce workpieces with reinforcement, ribs, undulations, or flanges that are difficult to manufacture by other methods to improve OEM metal stamping part rigidity.